07-10-2013 11:36 AM
I'm having a odd problem i havnt run into before.
i moved an ap105 that was installed at another office (and previously worked properly) to my enviroment. The AP showed up in the controller. however no clients can connect to it.
It is set to machine authentication, MS, Protected EAP, WPA-Enterprise, AES. (which is the same as other ap's, however obviously i'm overlooking something!) thanks!
07-10-2013 11:43 AM
If you do a show ap active and show ap database do you see any flags ?
Do you have other working APs in that same segment/IP Space ?
Also do a show ap bss-table ap-name <apname>
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
07-10-2013 01:31 PM
Couple of follow up questions:
- Are the radio lights on?
- Did the AP change AP Groups when you moved it?
- When at the other location, was on this controller or another?
can you run:
show ap bss-table | include <NameofAP>
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX