Wireless Access

Reply
Contributor II
Posts: 42
Registered: ‎08-22-2011

Not enough flash space

trying to upgrade 620 controller and i get the error "Not enough flash space".  cleaned everything out of filesystem that is not needed and rebooted still not enough space.

 

(controller_140) #dir  
-rw-r--r--    1 root     root        22111 Mar 15 09:15 20130313-config
-rw-r--r--    1 root     root        22266 Mar 15 10:13 default.cfg
drwx------    2 root     root            0 Mar 15 09:36 tpm

 

(controller_140) #show memory
Memory (Kb): total: 387684, used: 294104, free: 93580

 

(controller_140) #show storage
Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock11         156.0M    118.7M     37.3M  76% /flash
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/mtdblock9           50.0M     24.8M     25.3M  50% /mnt/img0
/dev/mtdblock10          50.0M     24.5M     25.5M  49% /mnt/img1

Guru Elite
Posts: 20,811
Registered: ‎03-29-2007

Re: Not enough flash space

type "tar crash" to see if there is a crash.tar file.  If there is, delete it, reboot and try again.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 42
Registered: ‎08-22-2011

Re: Not enough flash space

(controller_140) #tar crash
No crashes found on this machine.

Guru Elite
Posts: 20,811
Registered: ‎03-29-2007

Re: Not enough flash space

Please open a support case.  TAC could see if there are any "hidden" files that can be removed...

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎02-26-2013

Re: Not enough flash space

I had the same problem and got back enough space after deleting all but two saved configs.

Contributor II
Posts: 42
Registered: ‎08-22-2011

Re: Not enough flash space

Upgraded the Controller using the CLI instead of GUI and it worked fine.

 

(controller_140) #copy tftp: 172.20.21.145 ArubaOS_6xx_6.1.3.7_37112 system: partition 1
Copying file:..........................
Saving file to flash:
..........................................................
(controller_140) #
(controller_140) #show image version
----------------------------------
Partition               : 0:0 (/dev/mtdblock9)
Software Version        : ArubaOS 6.1.3.5 (Digitally Signed - Production Build)
Build number            : 35523
Label                   : 35523
Built on                : Fri Sep 28 07:46:05 PDT 2012
----------------------------------
Partition               : 0:1 (/dev/mtdblock10) **Default boot**
Software Version        : ArubaOS 6.1.3.7 (Digitally Signed - Production Build)
Build number            : 37112
Label                   : 37112
Built on                : Fri Feb 8 18:08:20 PST 2013

(controller_140) #
(controller_140) #write memory
Saving Configuration...

Configuration Saved.

(controller_140) #

Occasional Contributor II
Posts: 15
Registered: ‎07-18-2013

Re: Not enough flash space

it worked with me just one time, when i tried again i got the free space error message!!!, any help please??!!!1

Guru Elite
Posts: 20,811
Registered: ‎03-29-2007

Re: Not enough flash space

Try from the commandline or contact tac to see if there are any hidden files.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 15
Registered: ‎07-18-2013

Re: Not enough flash space

i did from CLI , no result, i am waiting reply from the TAC team

Contributor II
Posts: 42
Registered: ‎08-22-2011

Re: Not enough flash space

ran into the same problem trying to upgrade my controller to 6.3 only  this time the GUI and the CLI did not work.  I had to boot off the inactive partition (1) then upgrade partition 0 with the CLI and it worked.

Search Airheads
Showing results for 
Search instead for 
Did you mean: