@aruba_newbie wrote:
Ok!
First thing : If i really understand, there is no way to make AP61 Alcatel provisioning through a VPN to an Aruba controller!
Secondly, there is no way to change MTU settings unless it has already got the certificate locally?
Because i have more than 30 sites to connect to my Aruba controller with this configuration! If i have to unmount all APs in all the 30 sites and connect them locally to my controller in order to install certificate then send them back and mount them again, it will be a huge work!!!
There is absolutely no way to install certificate remotely or manualy in the AP?
Is it only a MTU issue or it's an Aruba license issue?
- I am just guessing that that YOUR specific VPN tunnel MTU makes it so that the certificate process cannot complete initially using the VPN. You should open a support case to ensure that this is the case. I am only guessing this, since across the VPN, the process does not complete
- The MTU settings are a parameter in the AP-Group, which is not obtained by the AP until after it receives its certificate
- Are you migrating access points at all of these sites from one Alcatel Controller to an Aruba Controller?
- It is NOT a license issue, if you have enough licenses. I am only guessing that it is an MTU issue since you have a VPN in place. You should open a case with TAC to determine what your true issue is.