Wireless Access

Reply
Occasional Contributor I
Posts: 9
Registered: ‎02-28-2016

On Airwave if the detected Rogue AP has a LAN MAC address. How do we check on controller?

If the detedted Rogue AP has a LAN MAC Address implies it was previously detected via a wired device may be a switch, later if the same device is being detected via a wireless AP, which in turn is being connected to a Controller. How can we check to which port on the switch this Rogue AP was connected initially by logging on to the controller?

Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Re: On Airwave if the detected Rogue AP has a LAN MAC address. How do we check on controller?

The controller would not have the port on the switch.  It would only know of the wired mac address.  Airwave would know the port, because it manages the switches and can see the switch tables.  The controller does not manage switches, so it would not have that information.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 9
Registered: ‎02-28-2016

Re: On Airwave if the detected Rogue AP has a LAN MAC address. How do we check on controller?

Hi cjoseph,

Thank you for the insight, was of great help.

Regards
Monica Brisson
Search Airheads
Showing results for 
Search instead for 
Did you mean: