Wireless Access

Contributor II
Posts: 45
Registered: ‎11-07-2011

PAP authentication with VIA



Im trying to configure VIA and made all the necessary configurations but VIA still tries to authenticate with PAP instead of MSCHAPv2 and what is set as authentication type in the aruba controller

I talked to a guy from aruba and he said it was a bug and they are working on it......somebody have any news about it





Posts: 540
Registered: ‎04-13-2009

Re: PAP authentication with VIA

I was under the impression that VIA authentication is PAP only at present.

@whereisjrw ACMX ACDX
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Aruba Employee
Posts: 116
Registered: ‎09-21-2010

Re: PAP authentication with VIA

Yes, if you use IKEv1 then PAP is used between the controller and the external radius server. However, ArubaOS 6.1 and VIA 2.X allow you to use IKEv2 which supports EAP-MSCHAPv2 and EAP-TLS

Search Airheads
Showing results for 
Search instead for 
Do you mean