Wireless Access

Reply
Contributor II

PBR - AOS8.3

Hi All,

 

I would like that users wired from VLAN 42 (natted) access the internet by VLAN 41 instead VLAN 1. Please see the diagram attached.

 

The VLAN 42 is assigned port 0/2 and the VLAN 41 is assigned at port 0/5 of my controller runnung AOS 8.3

 

Could you tell me if is this configuration possible?

 

Thank you

Highlighted

Re: PBR - AOS8.3

Unchecked the nat inside at the vlan level and do it under the user-role
And then create an ip nat pool using the IP address you want to use and then create an access rule to nat everything via the NAT pool

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Contributor II

Re: PBR - AOS8.3

Hi Victor.

 

Thank you for the tip. 

 

I create the NAT Pool as showed at pic1.

NAT-1.JPG

But when I went to create the user policy the a port option was required.

NAT-2.JPG

1. How could I choose all ports? 

2. The Pic 3. Is it the rigth way to associate policy to the controller interface?

NAT-3.JPG

 

Thank you very much

Re: PBR - AOS8.3

Try adding the ACL for the NAT pool via CLI



Thank you

Victor Fabian

Pardon typos sent from Mobile
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: