Wireless Access

Reply
Frequent Contributor II

POE + Injectors

Can  "7001G  " Injetcors work with AP225  ?

Or "9001G "  is a must ? 

It seems   Both Give 30 W ... what is the difference ? 

Re: POE + Injectors

i assume, but not sure, it helps in such cases to provide all information and not make us guess, you mean these

 

http://www.microsemi.com/products/poe-systems/pd-9001g-40-sp

 

http://www.microsemi.com/products/poe-systems/powerdsine-7001g

 

the 7001g is E(nd) O(f) L(ife) according to the site, so probably not a wise choice.

Frequent Contributor II

Re: POE + Injectors

i have soem old 7001g injectors

can i use for my new AP225 ?

Re: POE + Injectors

it might, the specs say:

The PD-7001G maintains the existing PoE standard (IEEE 802.3af) parameters with double the power.

 

if you read the specs for the 225 it says:

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source - Efficient mode PoE – power save with 802.3af PoE and limited functionality
* USB port disabled
* Second Ethernet port disabled
* 2.4-GHz 802.11n radio in 1x3:1 spatial-stream mode
* 5-GHz 802.11ac radio operates without restrictions*
Unrestricted functionality with 802.3at PoE+

 

so although the injector isn't formally 802.3at it would provide enough power. of course the AP might do extra checking making it not work on the unrestricted functionality.

 

don't believe you can 100% predict this without just trying.

 

 

Re: POE + Injectors

I have used both of these injectors and they power on an AP-225 but 802.11af will run the AP-225 in restricted mode
No usb, 1x3 MIMO on the 2.4Ghz, no 2nd ethernet port, etc..
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: