Wireless Access

Reply
Regular Contributor I
Posts: 188
Registered: ‎03-22-2013

Port Channel quesiton & PagP

Was having probs getting port channel up and running between a CatOS 6500 and 7220, until I found this archived thread:

 

http://community.arubanetworks.com/t5/ArubaOS-and-Controllers/EtherChannel-between-Aruba-and-Cisco-switch/m-p/438/highlight/true#M45

 

Just wanted to confrim that Aruba doesnt natively support PagP (being a cisoc propriety protocol), and therfore the advice in the thread is correct.  Being that I did confirm that "mode on" was the only setting that would work, this sort of answers the question!

 

I have ensured spanning tree has been disabled on the 7220 at both the interface and port channel levels.

Guru Elite
Posts: 8,458
Registered: ‎09-08-2010

Re: Port Channel quesiton & PagP

[ Edited ]

Correct, PAgP is Cisco proprietary.

 

Mode ON creates a static port-channel. You may want to consider using LACP.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: