I'm trying to use DHCP in my controller, but is not working over the wired connection:
This is the configuration:
ip dhcp excluded-address 172.16.18.1 172.16.18.5ip dhcp pool APs_NET default-router 172.16.18.1 lease 8 0 0 0 network 172.16.18.0 255.255.255.192 authoritative!service dhcpinterface vlan 1683 ip address 172.16.18.2 255.255.255.192
am I missing something?
Type: "show vlan status" to see if VLAN 1683 is assigned to any physical port.
If it is not assigned, assign it:
config t
interface gigabitethernet 1/1
switchport access vlan 1683
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.