Wireless Access

Reply
Regular Contributor I

Problems with RAP deployment

Hi community,

 

I´ve problems to deploy my rap3. we ´ve a 7030 controller with code6.4 running.

APs works fine.

The RAP woks fine when I put it into a local ethernet port in our companys lan.

Capture.JPG

but when I put my 3g Sitck in it the rap comes up and i can see it for short time on my controller it says:

Flag Rc2D and I cannot see it into the controller gui. The 3g stick works fine, I can ping 8.8.8.8 from the rap and I can ping the external ip of the controller...

What is the problem?

Guru Elite

Re: Problems with RAP deployment

You should first see if it will work on a wired port on the public internet.  That will rule out an issue with your 3G stick.

 

#! resolution to this issue:  If the ap-group that the AP is in has a system profile that has an lms-ip in it, remove the LMS-ip.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Regular Contributor I

Re: Problems with RAP deployment

Thanks, what a fast anwer.... :-)

 

shame on me, it was the lms promlem 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: