Hey everyone!
I have a brand new rap-5wn sitting here and I just can't get it to see the controller. Let's see if I can list what I have done:
1. firewall configuration is set to allow port 4500 to the aruba 3400 controller - I see 3 hits on the rule, but it doesn't seem to be reaching the controller. (not sure....)
2. On the aruba 3400 in VPN\ipsec configured and address pool,
3. in security/authentication/servers/l3 authentication set to default
4. created a remote ap access policy (security/firewall/policies) permitting svc-papi, svc-gre, svc-l2tp (any/any), and svc-tftp, svc-ftp (any mswitch)
5. Now for configuring the l3 auth I'm having some issues - when I go to the default-rap, I dont see a roll that I can select and not sure what server group to pick(ldap, radius, default)
So when I plug in rap, go to config it from an outside source I get a rc_error_Ikep1 error on a DSL modem that has no firewall enabled....
So just what am I missing here?
Any help would be appreciated - they want to ship this unit out as soon as possible.
thank you!
lirria
#3400