Wireless Access

Reply
Regular Contributor II
Posts: 232
Registered: ‎03-14-2012

QOS Configuration on the Aruba Controller

Hey Folks,

 

I'm trying to implement a Voice over WiFi Solution and I'm trying to figure out how to implement QOS on the Aruba Controller.

 

I assume this will be under the AP Group Profile. Under QOS. But I need to know how this configuration will apply to the Wireless Packets and how the Packets will be prioritized and queued and so on and so forth.

 

Now, how does this QOS(WMM) configuration work with QOS configuration on the Wired Network.

Is there a mapping configuartion that should be done on the Aruba Controller.

 

My APs are currently setup as Campus APs in Tunnel Forwarding Mode. And I also have RAPs setup im Split Tunneling Forwarding Mode.

 

Look forward to your response.

MVP
Posts: 4,179
Registered: ‎07-20-2011

Re: QOS Configuration on the Aruba Controller

Occasional Contributor II
Posts: 15
Registered: ‎09-29-2010

Re: QOS Configuration on the Aruba Controller

none of these links work. Do you have any updated ones?

Guru Elite
Posts: 20,583
Registered: ‎03-29-2007

Re: QOS Configuration on the Aruba Controller

The first and second links work for me.  The last one, does not.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 81
Registered: ‎10-26-2016

Re: QOS Configuration on the Aruba Controller

None of the links are working for me :(

Search Airheads
Showing results for 
Search instead for 
Did you mean: