Wireless Access

Reply
New Contributor

QoS on Aruba Controller

Hi Experts,

 

Our customer has a requirement on partitioning the backhaul bandwidth (the untrusted internetline) according to the SSID's(Virtual AP's). Assuming the backhaul line is 200 Mbps and that we have 3 SSID's, the allocation could be 40 %, 30 % and 30 % respectively. The backhaul partitioning requirement is 80 Mbps, 60 Mbps and 60 Mbps respectively for the 200 Mbps line. SSID 1 is supposed to use 80 Mbps, SSID 2 is supposed to use 60 Mbps and SSID3 is supposed to use 60 Mbps. 

 

I understand there are traffic management profiles and the 3 parameters which control the QoS are Station Shaping Policy,Proportional BW Allocation and Report Interval. 

 

Can I check if these parameters control the QoS in the air interface (wireless link) only or do these parameters consider the backhaul congestion also ? I am not sure if the parameters can achieve the backhaul partitioning requirement from the customer. Please advise. 

 

Thanks 

 

Regards

Ashwin

 

Guru Elite

Re: QoS on Aruba Controller

The traffic management profiles only deal with traffic in the air.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: