Wireless Access

Reply
Occasional Contributor I
Posts: 7
Registered: ‎08-04-2014

Quotation marks

When looking at my AP installation list, I am seeing an AP that has it's name in quotation marks.  What does this indicate?

Contributor I
Posts: 20
Registered: ‎02-14-2014

Re: Quotation marks

Where are you seeing this?  A controller, Instant GUI or Airwave?

MVP
Posts: 757
Registered: ‎03-25-2009

Re: Quotation marks

My guess?  Someone configured that AP with the quiotation marks.

Try renaming it. :)

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Contributor I
Posts: 20
Registered: ‎02-14-2014

Re: Quotation marks

[ Edited ]

That was my thought too, just wanted to verify that he was looking in a controller.  So if you are in the controller go into AP Installation, select the AP that has quotes around the name and then select Provision.  Go to the bottom and under AP Name enter in the value of the name of the AP (without quotes this time) and then Apply and Reboot.  Give it a few minutes to come back up and you should be fine.

Search Airheads
Showing results for 
Search instead for 
Did you mean: