Wireless Access

Reply
Occasional Contributor II
Posts: 13
Registered: ‎11-12-2014

RAP 109 at an external event - Blocked ports?

Hey Guys,

 

I need to setup a RAP 109 for use an external event. For this to work at the site, i need to speak with the local network guys.

 

Is there anything specific i need to ask them to do for it to work?

 

IE: Do i need to get them to unblock ports on their firewalls?  Or is there anything else i need to ask them for it to work?

 

Any help much appreciated! :)

 

Thanks

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: RAP 109 at an external event - Blocked ports?

You'll need to make sure the RAP can contact the controller over UDP 4500.  You'll also need to make sure DNS is allowed if the RAP is provisioned by hostname and not IP.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor II
Posts: 13
Registered: ‎11-12-2014

Re: RAP 109 at an external event - Blocked ports?

Awesome! Thanks for thw quick response!

 

I was thinking the same. So thats pretty much it, theres nothing that can really get in the way of these working?

Aruba
Posts: 1,644
Registered: ‎04-13-2009

Re: RAP 109 at an external event - Blocked ports?

Yup that should do it.    I would definitely provision them first; and just make sure you are clear to the event staff so you are not troubleshooting when you get there.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor I
Posts: 9
Registered: ‎11-19-2014

Re: RAP 109 at an external event - Blocked ports?

open the following ports on the firewall to make RAP able to communicate with the controller
 4500 UDP
 69 UDP

Search Airheads
Showing results for 
Search instead for 
Did you mean: