Wireless Access

Hi, all!

Help me please with configuration.

I have 2 x RAP-109.

Internet <-> (port ENET 0) RAP-109 (port ENET 1) <-> (port ENET 0) RAP 109

First RAP connect with Unternet from uplink port ENET 0, with port ENET 1 connect with other RAP-109.

Port ENET 0 have to be with static IP, from port ENET 1 have to transmit IP from internal DHCP-server IP-address to other RAP-109.
First RAP have to work like wireless router.

Have to be 1 SSID and 1 internal network for 2 RAPs and for users.

Thank you!

Hi!

This connection due to the specific area.

I want to have 1 port of RAP connected to Internet, other port is connected to second RAP.

1 port have to have it's own IP-address (from ISP), other port for internal network (for connect second RAP).
AP's have to work virtual controller (small network - 2 AP's)

Like in scheme.

You cannot do this.  You need an external DHCP server.  The internal DHCP server of an IAP cannot give out addresses for the management IP address of a different AP in the same cluster.

OK.

Which solution you can advice in this situation?

(when I have 2 AP's, 1 IP-address from ISP and have to have internal network with 1 SSID)

Thank you!

Do you have a router at the site that the ISP provided?

ISP give me only 1 IP-address.

But in IAP_User_Guide I find Deployment picture, which almost identical with my deployment.

(That's why I take RAP but not IAP AP's)

Thank you!

Hi, all!

I have success with this issue.

Just configure wired_port_profile for downlink.

In AP's tab I see 2 access points with different IP's:

1AP - static IP (to ISP)

2AP - IP received from internal DHCP-server

Thank you!