02-14-2012 06:21 AM - edited 02-14-2012 06:21 AM
Does RAP-2WG work with Aruba3600-US Version 18.104.22.168? A RAP-2WG after reset showed up in this controller with flags "IL" (inactive, unlicensed). I do have enough AP license. However, if this RAP-2WG force to an AOS 5 controller, it worked normal.
Solved! Go to Solution.
02-14-2012 06:40 AM
You may need to upgrade the backup partition. I know there was an issue with this, especially if it was on 3.4rn at one point in time. Have a look at this: http://community.arubanetworks.com/t5/Command-of-t
See what the partitions have on them.
02-14-2012 08:02 AM
Thanks zjennings, using the “show ap image version”, I found the RAP was stuck in AOS5. Using the instruction in COTD, it flash the new image and now showed up for the provisioning. Thanks all for your help!
Mike, we do not use the "white list". All APs must be provisioned by IT and document before hand out.
07-12-2012 10:47 AM
is RAP-2WG suitable for hotel application ??
we just installed one lot RAP-2WG in a hotel room for guest wifi access
we failed to configure the ap with the 3400 controller in past 7 days but no success
some AP work but some APs are not working..
some experienced users told us that we selected wrong AP model for hotel room application.
we need advice from experts??
07-12-2012 12:49 PM
The RAP2WG is specifically for the small office home office. It is not plenum-rated and does not support POE so it is not appropriate for the hotel. TheAP93 or the AP93H would be a better fit:
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
08-03-2012 07:33 AM
Finally , we can use most of the RAP-2WG in the hotel rooms project. 75% of the APs (total 144 pcs) are working fine yesterday.
However , new problem comes
The 3400 controller stucks and need reboot manually.
The os version is 22.214.171.124.
Any suggestion ???