Wireless Access

last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP-3's coming up as air monitors after 6.3.1.4 upgrade.

This thread has been viewed 0 times

  • 1.  RAP-3's coming up as air monitors after 6.3.1.4 upgrade.

    Posted Apr 10, 2014 08:18 PM

    Anyone have any ideas why my RAPs would be coming up as air monitors after upgrading to 6.3.1.4? They were working fine pre-upgrade.



  • 2.  RE: RAP-3's coming up as air monitors after 6.3.1.4 upgrade.

    Posted Apr 10, 2014 08:27 PM

     

    Are those under the same AP-Group and Controller ?

     

    Confirm how your RF-Profile is configured as an Air Monitor ?

     

    Did you do guys do a save config before rebooting the controller ?



  • 3.  RE: RAP-3's coming up as air monitors after 6.3.1.4 upgrade.

    Posted Apr 10, 2014 08:36 PM

    same AP group, same controller, we did save the config before rebooting and they are set to ap-mode.



  • 4.  RE: RAP-3's coming up as air monitors after 6.3.1.4 upgrade.
    Best Answer

    Posted Apr 10, 2014 09:02 PM

     

    Do you have any ap specifc configuration ?

     

    2014-04-10 20_57_26-AP Specific.png

     

    Are all the RAPs under that AP-Group showing up as Air Monitor  when you run the show  ap  active type air-monitor ?

     

     



  • 5.  RE: RAP-3's coming up as air monitors after 6.3.1.4 upgrade.

    Posted Apr 10, 2014 09:07 PM

    I did have ap-specific configuration and it was configured incorrectly. Up and working now. Thanks for your help!

     

    Another mark for the user error column. :)

     

    -Chris