Wireless Access

Reply
Occasional Contributor II
Posts: 13
Registered: ‎10-28-2014

RAP-3WN for Huawei 3276

Hi,

 

Can anyone tell how to setup a RAP-3WN using a Huawei 3276 usb Modem? The controller for remote APs is in a dmz with OS 6.3.1.5. This is the first time i am doing it, please explain step by step.

 

Thanks for the help!!!

 

Regards,

MVP
Posts: 447
Registered: ‎11-04-2011

Re: RAP-3WN for Huawei 3276

Immi,

 

The Huawei 3276 has a minimum software releas of 6.4 for controller and 4.1 for Instant.

 

Provisioning parameters:

 

usb_type=huawei-cdc

cellular_nw_preference=auto

usb_dev=0x12d11506

 

There are multiple versions of the E3276, not every type has been tested. The E3276-150 seems quite common and is reported to work.

 

Herman

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC.
Occasional Contributor II
Posts: 13
Registered: ‎10-28-2014

Re: RAP-3WN for Huawei 3276

hrobers,

 

Thank you, will upgrade the image and try it out.

 

Regards,

Occasional Contributor II
Posts: 13
Registered: ‎10-28-2014

Re: RAP-3WN for Huawei 3276

Hi,

 

I upgraded the image to 6.4 and the RAP is up in the Remote controller, but the USB doesnt seem to work. I provided the following details in the USB parameters.

 

usb_type=huawei-cdc

cellular_nw_preference=auto

usb_dev=0x12d11506

PPP username= Orange

PPP Password = ********

 

Do I need to specify other parameters as well:

TTY Device data path

TTY Device control path

Initialization String

Modeswitch

 

if i have to give these, what would be the values for it.

 

Thanks for your time and support...

 

Regards,

Immi

 

MVP
Posts: 447
Registered: ‎11-04-2011

Re: RAP-3WN for Huawei 3276

Those parameters are optional, you should be able to leave them empty.

 

If it does not work for you, please open a TAC case.

 

Herman

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC.
Search Airheads
Showing results for 
Search instead for 
Did you mean: