Wireless Access

Reply
New Contributor
Posts: 4
Registered: ‎01-31-2013

RAP Provisioning

I pre-provisioned a RAP2 device and I want to see the IP address parameters I setup on it when I provisioned it.  The Rap is not currently online but I want to see what I saved when I provisioned it.  How can I do that from the CLI?

 

Thanks, Tony

MVP
Posts: 4,307
Registered: ‎07-20-2011

Re: RAP Provisioning

 

 

 

You can do show ap database | include <name of the rap> and it should show up on the down list with the ip address it was setup if it came up or you can do show audit-trail and you can see the changes you made 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 4
Registered: ‎01-31-2013

Re: RAP Provisioning

Well, I did not get any returned data on the first command but the ah audit-trail did the trick.

 

Thank you kindly.

Search Airheads
Showing results for 
Search instead for 
Did you mean: