Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP : Right configuration for Branch?

This thread has been viewed 0 times

  • 1.  RAP : Right configuration for Branch?

    Posted Dec 13, 2016 12:42 AM

    Dear,

    I would like to have some deployment idea and help for RAP

    configurtion and design for branch site.

    HQ has Controller and some APs. Branch has 1 RAP connect back to

    HQ controller.

    At Branch site, customer have following requirement.

    a) Local network access ( servers and printers )
    b) Internet access ( going out from local router )
    c) HQ netwrok access ( HQ server via tunnel )
    d) SSID always-on for local access unless RAP reach to controller ( Internet at HQ site may down at night time )

    e) Branch users traffic can be able to managed?( facebook block )


    Can somebody give me some idea to fulfill this requirements?

    Currently I am doing spilt-tunneling method and item (d) can't be
    solved. Is there any other good solution?

    Thanks in advance.
    Pyae



  • 2.  RE: RAP : Right configuration for Branch?

    EMPLOYEE
    Posted Dec 13, 2016 07:02 AM

    Please see the Remote Access Networks Validated Reference Design here:  http://community.arubanetworks.com/t5/Validated-Reference-Design/Remote-AP-Networks/ta-p/155140

     

    (d) will only work with a Preshared Key Network.  For sites that have periodic outages to a main site,  you should consider deploying an Aruba Instant Cluster at those sites, instead:  http://www.arubanetworks.com/products/networking/aruba-instant/