Wireless Access

Reply
Occasional Contributor II
Posts: 12
Registered: ‎12-10-2010

RAP Wired AP Profile - Dynamic VLAN Assignment

Does anyone know if it is possible to do a dymanic VLAN assignment on the wired port of a RAP that has been configured for Access Mode?  Configuring the interface as a trunk port is not an option and returning Aruba-User-Vlan from ClearPass does not change the VLAN.  Not sure if this is possible and I am missing something in my configuration or if it just does not work.

 

Thanks

 

Guru Elite
Posts: 21,023
Registered: ‎03-29-2007

Re: RAP Wired AP Profile - Dynamic VLAN Assignment

Is the port in tunneled or bridge or split tunnel?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 12
Registered: ‎12-10-2010

Re: RAP Wired AP Profile - Dynamic VLAN Assignment

split-tunnel

Guru Elite
Posts: 21,023
Registered: ‎03-29-2007

Re: RAP Wired AP Profile - Dynamic VLAN Assignment

It is not supported on split-tunnel, no.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 12
Registered: ‎12-10-2010

Re: RAP Wired AP Profile - Dynamic VLAN Assignment

Thanks for the help, tunnel-mode does allow the VLAN to be changed, verified this morning.

Search Airheads
Showing results for 
Search instead for 
Did you mean: