Hello,
I have a 7210 controller running 6.5.3.2. A few months back I ran into a major problem and one of the things that was done during troubleshooting was to disable Control Plane Security.
I am currently trying to provision RAP 303's and they come up in the default group on the controller.
Once I provision them and hit the "apply and reboot" button they never come back up.
Is Control Plane Security required for RAPs to work properly?
I know that if I enable CPSEC again all the APs will reboot. Are there any other things that can happen?
Stuff like APs not coming up and such...
Thanks for your help!
best regards,
Harald