Wireless Access

Reply
Super Contributor II

RAP error message

Anybody know the reason for this message from a RAP -

sapd's state set to SAPD_STATE_CONFIG_RESET

This was listed in the show ap debug system status command onder the rebootstrap information.

Guru Elite

Re: RAP error message

What version of ArubaOS is this?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Aruba

Re: RAP error message

What version of code are you on?  

 

If you are on 6.1 or 6.2, the SAPD_STATE_CONFIG_RESET message merely means the LMS IP has changed for the RAP.  Was the message preceded by Changing to LMS messages?    In version 6.3, the text of the message was changed to be more meaningful; I think it now states something like "LMS Changed, resetting config and changnig to LMS...."

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Super Contributor II

Re: RAP error message

The AOS is 6.1.3.5 and there is only a single LMS address which a VRRP address. There is a change message for the LMS address - perhaps it lost connectivity to the LMS?

CONFIG_RESET just seemed like there was a more serious problem.

Guru Elite

Re: RAP error message

MattF,

 

Yes, it probably lost connection to the VRRP.  It will try to connect to the VRRP again one more time before bootstrapping and that is probably the message you are seeing;  Either way, you could have a connectivity issue.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: