Wireless Access

Reply
New Contributor

RAP eth0 (no config) directly connected to cable modem

Running a 620 with ver 6.2.1.5

RAP eth0 (no config) directly connected to cable modem, with at least one eth1 network split tunneling. Are there any known vulnerabilities for this deployment model? NOTHING should be allowed IN (with no established session) correct? Do the NAT ports get selected randomly?

Guru Elite

Re: RAP eth0 (no config) directly connected to cable modem

Qlife Empower,

 

By default a RAP has a firewall policy that protects the ethernet0 port and only allows UDP4500 (ipsec) and DHCP.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: