Wireless Access

Reply
Occasional Contributor II
Posts: 13
Registered: ‎07-23-2014

RAP implementation - Site with two ways to controller.

Hi Guys, please I need a help with the following scenario.

 

I have a romote site with two ways to the main site where the controlle will be installed, I think that the best way is to implement this solution with remote AP on the site B. But, I have a LAN to LAN link and the ADSL as a backup link. 

My doubt is related to the RAP configuration. How can I configure the RAP to find the controller and close the tunnel, independently of the link?Slide3.JPG

Guru Elite
Posts: 21,280
Registered: ‎03-29-2007

Re: RAP implementation - Site with two ways to controller.

You will need policy-based routing in your infrastructure to do what I think you want to do.  If you giave the RAP a static ip address and the gateway of the router that will send its traffic where you want, it might work outbounds, but might not work inbounds.  I think this needs to be solved on the infrastructure side so that your traffic will not be asymetric.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: