Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAP

This thread has been viewed 2 times

  • 1.  RAP

    Posted Dec 08, 2013 07:02 AM

    Dear community Engineers,

     

    Is there any other options to connect 2 branches via RAP without public IP in HQ?

     

    If there is what are the best practices ?

     

     

    Thanks 



  • 2.  RE: RAP

    Posted Dec 08, 2013 07:55 AM
    What exactly you are trying accomplish ?


  • 3.  RE: RAP

    Posted Dec 08, 2013 08:15 AM

    I am trying to connect HQ to branch office to establish voice flow over VPN but unfortunately both ends don't have public IP they have 

    DSL connection.



  • 4.  RE: RAP

    Posted Dec 08, 2013 08:30 AM

     

    Aren't able to reach the internet through that DSL line ? Because if that's the case you should be able to get a public IP address from from ISP



  • 5.  RE: RAP

    Posted Dec 09, 2013 08:58 AM

    I am trying to build a new connection is there any other solution rather than connecting via public IP???



  • 6.  RE: RAP

    Posted Dec 09, 2013 10:47 AM
    You could potentially have a standalone setup that doesn't have to communicate back to remote location like the Aruba instant .
    If you don't have a way to have a direct connection back to your controller on a remote location then there's isn't that many options available if you don't have a public ip to reach it