- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
07-24-2013 12:45 AM
Hello, we have changed the USB modem connected on RAP3.
Before we used K4505 and it worked without problems, now we use K4605 and we don’t have the device string and device ID for this modem.
Someone can help me?
Thanks and Best Regards
Gian
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-28-2013 06:33 PM
Hi Gian
Can you post the params you were using for the K4505? Huawei devices tend to all be using quite similar modeswitch etc., so let's start with the config that was working before.
Looking online there are a couple of versions of K4506, so we do need to determine the "product ID" that yours is using. Please take the USB modem and put it in a windows pc, connect it to the internet using the USB modem then visit device manager -> ports (COM and LPT). You should see the Huawei (or perhaps named as Vodafone) modem listed under this section, right click on it and choose "properties" - a small box will open which has a tab called "details" - click this. Finally, in the dropdown box that now appears choose "hardware IDs" and copy out the string you see, it will look something like this: USB\VID_12D1&PID_1003&REV_0000&MI_01
regards
-jeff
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 12:22 AM
Thanks for your support!
For K4505 USB modem I used the following params without problems:
USB Device Identifier: 0x12d11464
USB Dial String: ATDT*99***1#
In attachment you can fnd the screnshoot required.
Best Regards,
Gian
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 04:18 AM
HI Gian,
for a first attempt, please set device ID to 0x12d114c6 and leave everything else the same. If that fails, we can try modeswitching it - but let's try easiest way first.
regards
-jeff
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 05:21 AM
Thanks for your quickly reply. It was my first test :-) ... but without positive results.
Thanks for your support.
Regards,
Gian
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 07:03 AM
Gian
ok, then let's try to modeswitch it. Please add the following, leaving the device id as in my last post and configure this in the USB modeswitch field, including the double quotes.
"-v 0x12d1 -p 0x14c1 -M 55534243123456780000000000000011062000000100000000000000000000"
regards
-jeff
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 08:48 AM
Thanks for your quichky reply!
I have added the USB modeswitch as you suggest, but the Controller requires backslash before double quotes, so I have added it in this format:
\"-v 0x12d1 -p 0x14c1 -M 55534243123456780000000000000011062000000100000000000000000000\"
Nothing to do... it doesn't work!
Regards,
Gian
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 09:17 AM
controller CLI shouldnt need backslash, webui may want single quote, can you try both?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 09:44 AM
Only one info: in the old configuration (where K4505 works) I configured:
USB Device Identifier: 0x12d11464
USB Dial String: ATDT*99***1#
no USB modeswitch
Now we have changed the USB Device Identifier to : 0x12d114c6 and added the USB modeswitch as you suggested.
In this new config USB Dial String field will be the same or I have to delete it?
Best Regards
Gian
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: RAP3 with USB Modem K4605
Re: RAP3 with USB Modem K4605
07-29-2013 05:56 PM
Hi Gian
yes, dialstring should remain the same - the changes are the device ID and adding the modeswitch string.
regards
-jeff
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator