Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

RAP3 with a at&t aircard usb uplink

This thread has been viewed 0 times
  • 1.  RAP3 with a at&t aircard usb uplink

    Posted Oct 07, 2015 08:50 AM

    I am trying to setup a RAP3 with a at&t aircard usb uplink. I see that the aircard is trying to negotiate the connection but isn't going through. I tried different settings from the below thread, but no luck.

     

    http://www.airheads.eu/t5/Aruba-Instant-Cloud-Wi-Fi/Config-parameters-for-AT-amp-T-313u-on-RAP155-in-instant-mode/m-p/166272/highlight/true#M5805

     

     

     

    Anyone else had the same problem ?

    Can anyone help/ any suggestions ?

     

    Thanks,

    Mohit



  • 2.  RE: RAP3 with a at&t aircard usb uplink

    Posted Oct 07, 2015 08:56 AM

    What model is the USB device?



  • 3.  RE: RAP3 with a at&t aircard usb uplink

    Posted Oct 07, 2015 08:59 AM

    Sierra Wireless AirCard 313U.



  • 4.  RE: RAP3 with a at&t aircard usb uplink

    Posted Oct 07, 2015 10:12 AM

    The Sierra/Netgear 313U LTE modem from AT&T is natively supported on the RAP-3 beginning in 6.3.0.1 for campus RAP deployments and 3.3.0.1 for IAP deployments.


    The following are the setting/recommendations:

     

    Device Vendor & Product ID

    Provisioning for only 4G

    Provisioning for 4G/3G

    0x0f3d68aa/0x119968aa

    usb_type=sierrausbnet (10) cellular_nw_preference=4g_only (3) usb_dev=0x11990fff

    usb_type=sierrausbnet (10) cellular_nw_preference=auto (1) usb_dev=0x11990fff



  • 5.  RE: RAP3 with a at&t aircard usb uplink

    Posted Oct 07, 2015 02:18 PM

    I am trying to setup it in the RAP remote access point controlled by mobility controller mode.

    And I am unable to access the rap's cli through ssh/telnet. Can you tell me how to configure it through the web gui ?



  • 6.  RE: RAP3 with a at&t aircard usb uplink