Hi,
Yes, the RAP5 is fully functional as a RAP over 4G and via ethernet broadband connected to port 0. I have it setup to give 4G higher priority if both are connected. What I'm trying to accomplish is when 4G is not available and the ethernet broadband at the hotel has a guest portal page, i want to be able to connect a laptop to port 1 to access the hotel guest portal for registration.
I had a remote technician try this at a site that offferend guest ethernet broadband and his laptop wasn't able to pull up the guest portal. He's not certain if his laptop received an IP from the RAP5. I tried to simulate this on my home network by disconnecting the cable connection from my cable modem, i saw the power light started to blink on the RAP5 so that means it lost connectivity with my controller in the data center. I plugged a laptop into port 1 of the RAP5 and was not able to obtain an IP address. Is this suppose to work as default or some configuration is required?
Thanks,
ckc