Wireless Access

Reply
New Contributor

Radius issues

I always have the error on the "Network Policy Server" -> "" A RADIUS message with the Code field set to 2, Which is not valid, what field received on port 1812 from RADIUS client Networkcontroller_4 Valid values of the RADIUS code. are documented in RFC 2865. ""

 

please suggest any solutions

Guru Elite

Re: Radius issues

According to this:  http://technet.microsoft.com/en-us/library/cc735325(v=ws.10).aspx

 

Make sure the NPS is not configured to require the message authenticator attibute.

Also, check and make sure the preshared key between the controller and NPS are correct.

 

If you have any further issues, you probably have to contact Microsoft for a proper explanation of that message.

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: