Wireless Access

Reply
Occasional Contributor I

Reboot AP Aruba Mobility Master 8.2 GUI

How do I reboot an Access Point from the GUI on Aruba Mobility master 8.2.

 

Thanks

Guru Elite

Re: Reboot AP Aruba Mobility Master 8.2 GUI

You couldn't reboot access points from the GUI in 6.x from the master either unless you reprovisioned them.  On the MM you can type:

(ArubaMM-VA) [mynode] #apboot ap-name <name of ap>

or go to Configuration> Access Points.  Select your access point and click on Provision.  Delete a character in the ap's name and then put it back so that the "submit" button appears (fake change).  The submit button will reboot the access point.

 

You typically don't have to reboot an access point unless you are changing the name, group or mesh status. 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: