Wireless Access

Reply
Occasional Contributor I

Received Signal Strength Indication value

Hi everyone, 
I'm a newbie with Aruba's equipments, and when i use SSH to access the Aruba IAP with these commands: "show ap client-probe-report 0" and "show ap client-probe-report 1" there is a value named RSSI and i'm wondering on what scale is the RSSI measured and what is the max value of it?
Thank you in advanced guys!

Re: Received Signal Strength Indication value

I'm not sure if that information is available. You probably have read already https://en.wikipedia.org/wiki/Received_signal_strength_indication on the meaning of RSSI which is not very well defined nor how you should use the numbers.

 

I just tested and with a client on the AP, I have seen 89 as maximum value of my measurements.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: