Wireless Access

I'm in between an implementation and while provisioning the APs found that they are turning to AM.

So I checked if mode aware ARM is NO, but it was OFF.

ARM profile also in "ap-mode"

but #show ap allowed-channels ap-name <mac>     gave me below o/p.

(ARUBA-WLC-MASTER) # show ap allowed-channels ap-name <ap-name>

Allowed Channels for AP <ap-name> Country Code "IN" Country "India"
-----------------------------------------------------------------------------

PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) None
802.11a (indoor) None
802.11g (outdoor) None
802.11a (outdoor) None
802.11g 40MHz (indoor) None
802.11a 40MHz (indoor) None
802.11g 40MHz (outdoor) None
802.11a 40MHz (outdoor) None
802.11a 80MHz (indoor) None
802.11a 80MHz (outdoor) None
802.11a 160MHz (indoor) None
802.11a 160MHz (outdoor) None
802.11a (DFS) None

(ARUBA-WLC-MASTER) #show country

Country:IN
Model:Aruba7205
Hardware:Unrestricted

(ARUBA-WLC-MASTER) #show ap active

Active AP Table
---------------
Name Group IP Address 11g Clients 11g Ch/EIRP/MaxEIRP 11a Clients 11a Ch/EIRP/MaxEIRP AP Type Flags Uptime Outer IP
---- ----- ---------- ----------- ------------------- ----------- ------------------- ------- ----- ------ --------
70:3a:0e:cd:51:6c default 192.168.65.121 0 AM 0 AM 335 Aa 8m:0s N/A

Dec 1 17:33:59 fpapps[3916]: <208801> <4683> <DBUG> |fpapps| LACP: dot3adPerMach: intf 2 event 12 curState 3 nextState 2
Dec 1 17:34:00 KERNEL(<mac>@192.168.65.176): [ 66.586851] asap_mod: asap_dpa.c:3640:asap_dpa_rem_lms() tun is unset
Dec 1 17:34:00 KERNEL(<mac>@192.168.65.176): [ 66.586851] asap_mod: asap_dpa.c:3640:asap_dpa_rem_lms() tun is unset
Dec 1 17:34:00 stm[4092]: <402000> <4092> <WARN> |stm| AP <mac> radio 0: No valid channels; entering air monitor mode.
Dec 1 17:34:00 stm[4092]: <402000> <4092> <WARN> |stm| AP <mac> radio 1: No valid channels; entering air monitor mode.
Dec 1 17:34:01 stm[4092]: <402000> <4092> <WARN> |stm| AP <mac> radio 0: No valid channels; entering air monitor mode.
Dec 1 17:34:01 stm[4092]: <402000> <4092> <WARN> |stm| AP <mac> radio 1: No valid channels; entering air monitor mode.
Dec 1 17:34:03 fpapps[3916]: <208077> <4633> <DBUG> |fpapps| LACP: LACPDU received on port 0/0/0

 

 

 

AOS: 6.5.0.2

AP: 325

Controller: 7205

 

Any idea  ?

I don't see India on the Approval list for the AP325 yet:  https://geocompliance.arubanetworks.com/Home/Index/325

Thanks Colin.
Had a call with TAC and upgarded to 6.5.0.3. Now its working with IN.
(ARUBA-WLC-MASTER) #show ap allowed-channels ap-name ap-335

Allowed Channels for AP "70:3a:0e:cd:51:6c" Country Code "IN" Country "India"
-----------------------------------------------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (indoor) 36 40 44 48 52 56 60 64 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
802.11a 40MHz (indoor) 36-40 44-48 52-56 60-64 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
802.11a 40MHz (outdoor) 149-153 157-161
802.11a 80MHz (indoor) 36-48 52-64 149-161
802.11a 80MHz (outdoor) 149-161
802.11a 160MHz (indoor) 36-64
802.11a 160MHz (outdoor) None
802.11a (DFS) None

Yes.  India approval was at the bottom of the page.  Sorry.