Wireless Access

Reply
Regular Contributor II
Posts: 242
Registered: ‎09-11-2013

Remote AP RAP step by step configuration

[ Edited ]

Hi forum,

 

I have been seeing a growing need for RAP from our customers, there isn’t a customer that is not asking about RAP.

I have only done it in my lab, never really in a production environment.

What I would like to ask you guys is if you can maybe put together a templet of configuration for me to help me with initial setup i.e. aliases for the internal network, policies for split tunneling, user roles, VPN setting and configs, AP group configuration.

If you have done it for your customer, can you share with me your configs where I can place my IP addressing and naming and be able to apply it to a simple architecture of one DMZ controller with a public ip address on one interface to terminate RAPs.

Thanks everyone in advance,

 

Aruba
Posts: 1,290
Registered: ‎08-29-2007

Re: Remote AP RAP step by step configuration

Have a good read through the validated reference design guide on RAP deployments.

 

http://www.arubanetworks.com/vrd/RAPVRD/wwhelp/wwhimpl/js/html/wwhelp.htm

 

the Aruba Solution Exchange would be worth a look to give you a template config for RAPs as well.

 

https://ase.arubanetworks.com


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Regular Contributor II
Posts: 242
Registered: ‎09-11-2013

Re: Remote AP RAP step by step configuration

Thanks,

I have read these. They are too general for me to be able to use them as a step by step guide. ase has only one RAP solution that is "Remote AP (RAP) Whitelist"

anyways, I will keep asking around. thought someone here has done it so many times that they created a template for the configuration.

Search Airheads
Showing results for 
Search instead for 
Did you mean: