Wireless Access

Reply
New Contributor
Posts: 1
Registered: ‎03-23-2012

Remote AP

I have a remote AP that was deployed and I want to make changes to it. Can I do this from the controller that it is connected to?

Guru Elite
Posts: 21,524
Registered: ‎03-29-2007

Re: Remote AP

 

Every remote AP gets its configuration when it boots up and contacts the controller.  Even after that, most changes made to that Remote AP's AP group while the AP is running get propagated real-time.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 8,765
Registered: ‎09-08-2010

Re: Remote AP

If you have a single controller, yes. If you have multiple controllers, you'll need to make changes on the master.

Sent from Nine

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: