Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎08-02-2011

Remove MAC from user-debug ?

How can I remove the MAC addresses from the user-debug?  I add the MAC addresses using the command below, but when I no longer need to debug that users MAC, I cann't remove it, and the list keeps growing?

 

(Aruba3600) (config) #logging level debugging user-debug

 

 

(Aruba3600) # show debug     (I changed the MAC addresses in the Debug Value field)

 

DEBUG LEVELS

 ------------

 Facility          Level            Debug Value        Sub Category  Process

--------            -----              -----------                 ------------           -------

user-debug  debugging   00:00:00:00:00:00      N/A                  N/A

user-debug  debugging   00:00:00:00:00:01      N/A                  N/A

 user-debug  debugging  00:00:00:00:00:02      N/A                N/A

user-debug  debugging   00:00:00:00:00:03      N/A                 N/A

user-debug  debugging   00:00:00:00:00:04      N/A                 N/A

user-debug  debugging   00:00:00:00:00:05      N/A                 N/A

 

Thanks,

Chad

Aruba 3600 Controller

Aruba OS ver. 6.1.3.4

 

 

 

MVP
Posts: 432
Registered: ‎07-26-2011

Re: Remove MAC from user-debug ?

You do the following

 

conf t

no logging level debugging user-debug xx.xx.xx.xx.xx.xx

 


Simply add "no"  to the command and this will remove it.

ACMA, ACMP
If my post addresses your query, give kudos:)
New Contributor
Posts: 2
Registered: ‎08-02-2011

Re: Remove MAC from user-debug ?

That did  it...

 

Thanks for the help!

 

Regards,

Chad

Search Airheads
Showing results for 
Search instead for 
Did you mean: