Wireless Access

Reply
Occasional Contributor II
Posts: 21
Registered: ‎03-10-2011

Replacing 3400 for a 3600

We are replacing a 3400 controller for a 3600 controller.  Is there a best way to do this?  can I just copy over the config, turn off the 3400 and turn on the 3600?  I know that there are licensing issues, but from  a harware/software/config standpoint, is that really all I have to do?

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: Replacing 3400 for a 3600

 

The best way is to do a flashbackup and restore it on the new one.

 

But here's a couple good threads :

 

http://community.arubanetworks.com/t5/ArubaOS-and-Mobility-Controllers/Replacing-Master-M3-controller-with-a-3600-Controller/m-p/21944#M1103

 

http://community.arubanetworks.com/t5/ArubaOS-and-Controllers/Best-Practice-for-replacing-a-master-controller/td-p/7290

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 21
Registered: ‎03-10-2011

Re: Replacing 3400 for a 3600

Thanks! I will give that a try

Search Airheads
Showing results for 
Search instead for 
Did you mean: