Wireless Access

Reply
Occasional Contributor II

Report definition for downed controllers

Running 7.3.9, a master console and 15 AMPs with about 300+ controllers. I'm trying to build a report definition that will spit out a list of controllers that are down. We have a number of sites with their own folders. Each site has 2 groups, one for controllers and the other for APs.

We can't quite seem to come up with the right custom option and filter to get something usable. Any thoughts?

Moderator

Re: Report definition for downed controllers

I don't currently have a 7.3.9 AMP, but to get you a quicker response:

 

On AMP 7.6.1, Reports -> Device Uptime report

Filter by device type -> select controllers, this includes master/standalone, local, standby, and virtual controllers

Choose the option to 'include details about every device'

Then enable the setting 'limit to devices with downtime' - this flag only affects data displayed in a table, not graphs

You can set your report start and end time to a smaller window, I gave it a 10 minute window

 

device uptime.jpg

 

Alternatively, you can choose the 'custom report' and only add the 'device uptime' -> 'uptime by device' portion.

 

This report may or may not have been available in 7.3.9, but it's definitely there for 7.6.1 (7.6.2 to be released next week).


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Occasional Contributor II

Re: Report definition for downed controllers

Thanks Rob, This was close enough to 7.3 to get me there.


Chris

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: