Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎07-25-2014

Reporting

Hi,


Is it possible to make weekly report on Down and Up AP`s (access points). I already set the trigger on "Device down" and "Device up", but also need summary of the week.

 

For eg. : 

[time] device DOWN
[time] device UP

 

Version: AMP 7.7.9

 

Thank you in advance !

Guru Elite
Posts: 20,789
Registered: ‎03-29-2007

Re: Reporting

Go into the reports and create a custom device uptime report.uptime.png



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎07-25-2014

Re: Reporting

Thank you cjoseph for your suggestion.

 

In my case this uptime report is not very useful.

 

Nevertheless I found the way to make what I needed. Maybe for someone will be helpful.

 

As I mentioned before I am already had triggers on Device up/Device done. So all AMP Alerts on Up/Down I found in System > Alerts.

Lastly I download export CSV file and import to Excel.

 

I hope for somebody this information will be helpful.

 

Good luck

Guru Elite
Posts: 20,789
Registered: ‎03-29-2007

Re: Reporting

draugas,

 

Oh, you wanted the up/down events with timestamps?

 

That information is provided by the controller via syslog.  If you don't want to have to export from Airwave, just have syslog on the controller be sent to an external syslog collector and filter based on up or down.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor II
Posts: 56
Registered: ‎05-23-2011

Re: Reporting

I believe this is what I'm looking for too.  I have a number of Access Points on Wireless Carts.  They get plugged in / unplugged throughout the week.  I'd like a report that runs for a specific AP which states something like:

3/24/15  Up 3:35pm

3/24/15  Down 4:20pm

3/24/15  Up 5:00pm

 

Is there anything like this?

Moderator
Posts: 1,252
Registered: ‎10-16-2008

Re: Reporting

Depending on time span, you can also make use of the AMP event logs:

/var/log/amp_events

 

I was able to get it pretty close using:

# cat /var/log/amp_events | grep -i system | grep -i 'up\|down' | grep -v update


Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Search Airheads
Showing results for 
Search instead for 
Did you mean: