Hi, just to not leave anything out. Is the port on the controller configured as trusted? I ask this because you say is directly connected.
If the port configuration says untrusted change it to trusted and give it a try.
I hope this helps.
Original Message:
Sent: Mar 24, 2023 02:50 AM
From: RK18
Subject: Restore a configuration files on an Aruba controller
Hi,
any luck? is it done ??
Thanks
Original Message:
Sent: Mar 06, 2013 09:20 AM
From: Zakaria
Subject: Restore a configuration files on an Aruba controller
Hi,
- I am connected to the port 1: It is a port trunk with native Vlan 1 : 10.1.10.0/24
- I changed the port. Same problem.
-Tftp server ! Tftpd64 on windows 7 prof.
Thnakx