Wireless Access

Reply
Contributor I

Restore predefined roles/roles

Is there a simple way to restore the predefined firewall policies and roles, i.e. getting rid of all customizations or differences due to upgrades?
Contributor I

Re: Restore predefined roles/roles

Maybe copy out "original.cfg" via tftp/scp/...

View in favorite editor and pretty much do a compare with "show running".

 

Or copy out both "original.cfg" and "default.cfg" and copy paste the default roles from original to default > upload to controller and reload if you can spare some downtime.

Contributor I

Re: Restore predefined roles/roles

original.cfg looks like the original configuration after initial setup. That is from an old version and before I have installed pefng licenses. It's not useful for my purpose...

Guru Elite

Re: Restore predefined roles/roles

Attached are policies after the PEFNG license is installed.

 

If the attachment is unclickable, try this link:

 

http://community.arubanetworks.com/aruba/attachments/aruba/unified-wired-wireless-access/73101/1/firewallpolicies.txt



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: Restore predefined roles/roles

Thanks. Is that for arubaos 6.5.3.1?

Guru Elite

Re: Restore predefined roles/roles

It is not from 6.5.3.1.  It is a partial configuration of default roles and firewall policies that have not changed in years.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: