Wireless Access

last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Retry value

This thread has been viewed 4 times

  • 1.  Retry value

    Posted Feb 21, 2016 10:36 PM

    Hi,

    Ideally what should be the minimum retry counter value?.If retry count is much higher , does it mean there is an issue ?

    Thank you 

     



  • 2.  RE: Retry value

    EMPLOYEE
    Posted Feb 22, 2016 05:27 AM
    Please post a screenshot of what retry value you are referring to.


  • 3.  RE: Retry value

    Posted Feb 22, 2016 10:47 PM

    Hi,

    I am talking  about  the retranmission rate which is showed in the spectrum analyzer .

    sorry for confusing

    Thank you



  • 4.  RE: Retry value

    EMPLOYEE
    Posted Feb 23, 2016 04:39 AM

    If there are alot of packets, a high retry value means there is a problem.  If there are two packets sent and one is a retry, that means 50%, but there are not alot of packets.  That does not automatically indicate a problem.