Wireless Access

Reply
Occasional Contributor II
Posts: 21
Registered: ‎04-07-2011

Rogue Notification

I need to have a notification sent (email and/or sms text) when a Rogue or suspected rogue is detected.  How can I accomplish this?  I have been looking for this for a long time and am coming up empty.  There has to be a way to do this.  Any suggestions would be appreciated.

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: Rogue Notification

You can do this with AirWave or another Networking Monitoring system (via SNMP traps).  There is no way to do this within the controller itself.

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor II
Posts: 21
Registered: ‎04-07-2011

Re: Rogue Notification

I have airwave, but all I can see is that is records that a rogue/suspected rogue has been detected.  I can't see where it will actively send a notification.  Can you point me the the right direction?

Aruba
Posts: 1,643
Registered: ‎04-13-2009

Re: Rogue Notification

You'll need to setup a trigger for this:

        System --> Triggers --> Add --> Type=Rogue Device Classified

 

Fill out the conditions and restrictions, etc.

 

Setup your email server if you haven't already:

        AMP Setup --> General --> Additional AMP Services section

 

 

------------------------------------------------
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX

Occasional Contributor II
Posts: 21
Registered: ‎04-07-2011

Re: Rogue Notification

Thanks.  I'll give that a try.

Search Airheads
Showing results for 
Search instead for 
Did you mean: