Wireless Access

Reply
Frequent Contributor I

Running ADP /tmp/master No such file or directory

Hi there,

We are seting up a lab environment with an Aruba 3200 controller ArubaOS 6.3.1.7 and a new AP-105. When powerup, the AP keep rebooting with the message in subject.

Below is the log:

APBoot 1.4.0.3 (build 37726)

Built: 2013-03-21 at 20:13:41

Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1

Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
Using eth0 device
TFTP from server 172.23.4.61; our IP address is 172.23.4.200
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex

ARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
Using eth0 device
TFTP from server 172.23.4.61; our IP address is 172.23.4.200
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: T #################################################################
########
done
Bytes transferred = 4724140 (4815ac hex)

Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
Automatic boot of image at addr 0x02000000 ...
ELF file is 32 bit
Loading .text @ 0x80e00000 (4655272 bytes)
Loading .data @ 0x812708b0 (32 bytes)
Clearing .bss @ 0x812708d0 (16 bytes)
## Starting application at 0x80e00000 ...
Uncompressing...........................................
ú
Aruba Networks
ArubaOS Version 6.3.1.7 (build 43819 / label #43819)
Built by p4build@corsica.arubanetworks.com on 2014-05-19 at 16:53:18 PDT (gcc version 4.3.3)
CPU Rev: aa
71x CPU
Flash variant: default
Cache parity protection disabled
Using 340.000 MHz high precision timer. cycles_per_jiffy=680000
Memory: 121856k/131072k available (1931k kernel code, 9088k reserved, 752k data, 3784k init, 0k highmem)
available.
detected lzma initramfs
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=17819136
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com> ................................................................................................................................................................................................................................................................................
AR7100 GPIOC major 0
wdt: registered with refresh
Enabling Watchdog
Talisker RSSI LED initialization
Creating 1 MTD partitions on "ar7100-nor0":
0x00000000-0x01000000 : "flash"
i2c /dev entries driver
i2c-talisker: using default base 0x18040000
AD7416 driver probing for devices on AR7100 I2C
.<6>lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver

Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
Starting Kernel DES KAT ...Completed Kernel DES KAT
Starting Kernel AES KAT ...Completed Kernel AES KAT

Starting Kernel AESGCM KAT ...Completed Kernel AESGCM KAT

Domain Name: arubanetworks.com
No panic info available
Testing TPM... Passed
ag7100_mod: module license 'unspecified' taints kernel.
AG7100: Length per segment 512
AG7100: Max segments per packet 4
AG7100: Max tx descriptor count 400
AG7100: Max rx descriptor count 252
AG7100: fifo cfg 3 018001ff
AG7100CHH: Mac address for unit 0
AG7100CHH: 9c:1c:12:ca:8a:fe
ATHRF1: Port 0, Neg Success
ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 0
AP xml model 39, num_radios 2 (jiffies 5236)
init_asap_mod: installation:0
radio 0: band 1 ant 0 max_ssid 8
radio 1: band 0 ant 0 max_ssid 8
Starting watchdog process...
Got all network ag7100_ring_alloc Allocated 4800 at 0x8070e000
params from APboag7100_ring_alloc Allocated 3024 at 0x8771b000
ot env. SkippingAG7100: cfg1 0xf cfg2 0x7014
DHCP
ATHRF1: Port 0, Neg Success
ATHRF1: unit 0 phy addr 0 ATHRF1: reg0 3100
AG7100: unit 0 phy is up...RGMii 1000Mbps full duplex
AG7100: pll reg 0x18050010: 0x110000 AG7100: cfg_1: 0x1ff0000
AG7100: cfg_2: 0x3ff
AG7100: cfg_3: 0x18001ff
AG7100: cfg_4: 0xffff
AG7100: cfg_5: 0xfffef
AG7100: done cfg2 0x7215 ifctl 0x0 miictrl 0x22
Writing 4
172.23.4.200 255.255.254.0 172.23.4.1
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Restarting system.

 

Please help.

Regards,

Re: Running ADP /tmp/master No such file or directory

Try this:

https://arubanetworkskb.secure.force.com/pkb/articles/HowTo/R-1316

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Frequent Contributor I

Re: Running ADP /tmp/master No such file or directory

Hi Tim,

The issue has been resolved, the master ip was missing in the AP configuration.

Thank you for your help.

 

Regards,

 

 

 

Occasional Contributor II

Re: Running ADP /tmp/master No such file or directory

Can you repost the link? it seems to be broken and I am having this issue with an AP325 right now. Thanks

 

Running ADP...

cat: /tmp/master: No such file or directory

Done. Master is

killall: nanny: no process killed

killall: sapd: no process killed

Sending SIGKILL to all processes.

Please stand by while rebooting the system.

[  143.727522] Restarting system.

[  143.751546] Going down for restart now

 

 

Guru Elite

Re: Running ADP /tmp/master No such file or directory

What discovery method are you using for your access point?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Highlighted
Occasional Contributor II

Re: Running ADP /tmp/master No such file or directory

I believe I am using a DHCP alias: aruba-master

 

I am not the only admin to this system though, so someone may have enable ADP by accident. It is enabled on my master at the moment but I don't want to turn it off if it isnt the problem. 

 

Thanks

 

Jay

Guru Elite

Re: Running ADP /tmp/master No such file or directory

Do you mean DNS alias?  You should stop the AP at the apboot> prompt and type "dhcp" to see if it finds a controller.  If not, your network is not configured properly for discovery.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: Running ADP /tmp/master No such file or directory

Yes sorry, I will try that and see how it goes.

 

Thanks!

Occasional Contributor II

Re: Running ADP /tmp/master No such file or directory

Ok, so ADP is enabled on my master, disabled on the locals. I still see the same log on the console of the CLI. This is the first AP deployment in Latin America for us. the US APs work fine, but these keep going into that reboot loop. 

 

 

10.249.122.161 255.255.255.0 10.249.122.26 10.249.122.1

Running ADP...cat: /tmp/master: No such file or directory

Done. Master is

killall: nanny: no process killed

killall: sapd: no process killed

The system is going down NOW !!

Sending SIGKILL to all processes.

Please stand by while rebooting the system.

[  163.857482] Restarting system.

[  163.881474] Going down for restart now

 

 

APBoot 1.5.5.8 (build 57191)

Built: 2016-11-04 at 17:53:10

 

Model: AP-32x

DRAM:  491 MB

SF:    Detected MX25U3235F with page size 64 kB, total 4 MB

Flash: 4 MB

NAND:  132 MiB

PCIE0: link up

PCIE1: link up

       dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3

       00  00  168c  0040 00002   00 00000004 00000000 00000000 00000000

       dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3

       00  00  168c  0040 00002   00 00000004 00000000 00000000 00000000

Power: 802.3af POE

In:    serial

Out:   serial

Err:   serial

Net:   eth0, eth1

Radio: qca9990#0, qca9990#1

Reset: warm

FIPS:  passed

 

Hit <Enter> to stop autoboot:  0

apboot>  

 

 

Things to look for? the DNS alias pings @ my master address. 

 

At a loss here. AP reset didnt change results. 

 

Guru Elite

Re: Running ADP /tmp/master No such file or directory

What do you get when you type "dhcp" at the apboot> prompt?



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: