I have a 200 controller running 5.0.4.16 and I've been monitoring some snmp values for the past year in cacti and about 2 months ago the count for 802.1x users seems to just climb and climb as the controller is powered on. I looked back in the config changes and found that I had enabled the ipv6 firewall around this time. I tried disabling it but the value still seemed wrong until I did a reload. I even tried doing a re-init on the wms database before disabling the ipv6 firewall but after rebooting it seemed like the value would start at about 2x the number it should be and then continune to climb.
.1.3.6.1.4.1.14823.2.2.1.4.1.4.1.0 = Gauge32: 17 << 802.1x user count
.1.3.6.1.4.1.14823.2.2.1.4.1.4.2.0 = Gauge32: 0
.1.3.6.1.4.1.14823.2.2.1.4.1.4.3.0 = Gauge32: 0
.1.3.6.1.4.1.14823.2.2.1.4.1.4.4.0 = Gauge32: 2
.1.3.6.1.4.1.14823.2.2.1.4.1.4.5.0 = Gauge32: 0
After disabling the ipv6 firewall AND reloading:
.1.3.6.1.4.1.14823.2.2.1.4.1.4.1.0 = Gauge32: 5 << 802.1x user count
.1.3.6.1.4.1.14823.2.2.1.4.1.4.2.0 = Gauge32: 0
.1.3.6.1.4.1.14823.2.2.1.4.1.4.3.0 = Gauge32: 0
.1.3.6.1.4.1.14823.2.2.1.4.1.4.4.0 = Gauge32: 2
.1.3.6.1.4.1.14823.2.2.1.4.1.4.5.0 = Gauge32: 0
I didn't find any KB describing this, so I'm not sure what is going on. Any ideas?
Thanks!