Wireless Access

Reply
Occasional Contributor II

SNMP for APs

Hello,

 

Is there away to push out SNMP settings for APs managed by a 7205 controller?

 

I cant seem to find the place where to configure this :(

 

Best regards,

Re: SNMP for APs

What traps are you trying to see, the traps will be sent from the controller there is no traps from the AP. You can configure SNMP within:

 

Configuration > Management > SNMP

You can see which traps are disabled/enabled with the following CLI command:

#show snmp trap-list

...and enable/disable accordingly

(config) #snmp-server trap <enable/disable> <trap name>

 


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor II

Re: SNMP for APs

I just wanted to be able to full information from the APs from our IMC, hostname, uptime, version, models etc 

Re: SNMP for APs


@Gubienwrote:

I just wanted to be able to full information from the APs from our IMC, hostname, uptime, version, models etc 


there is no snmp agent on the APs, for what you want, query the wlsxWlanAPTable (aruba-wlan.my) on the controller, it has name, uptime, model, serial etc.

 

e.g. check the available fields using this or in the mib

snmpwalk -v2c -c public123 -O0X -mALL -M/home/mibs/6.5.4.3 192.168.1.123  wlsxWlanAPTable

or
snmptable -v2c -c public123 -O0X -mALL -M/home/mibs/6.5.4.3 192.168.1.123  wlsxWlanAPTable

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: