Wireless Access

last person joined: 13 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

SNMP: wlsxAccessPointIsDown

This thread has been viewed 0 times

  • 1.  SNMP: wlsxAccessPointIsDown

    Posted Feb 20, 2012 12:21 PM

    We are using OpManger to monitor our SNMP traffic and when I added the Aruba MIBs, we started getting flooded with these messages (but for every AP we have on campus):

     

    The trap is received from Aruba-Secondary.The trap details are as follows , apLocation=Bio-Rm.211-Hall apIpAddress=null

    The trap is received from Aruba-Secondary.The trap details are as follows , apLocation=Bio-Rm.215-Hall apIpAddress=null

    The trap is received from Aruba-Secondary.The trap details are as follows , apLocation=Bio-Rm.219-Hall apIpAddress=null

    The trap is received from Aruba-Secondary.The trap details are as follows , apLocation=Bio-Rm.203-Hall apIpAddress=null

     

    Does anyone have any ideas as to why the "apIpAddress"=null?  Any ideas on how to correct it?  I'm assuming that with the apIpAddress=null that's why the APs are sending the AccessPointisDown trap.



  • 2.  RE: SNMP: wlsxAccessPointIsDown

    EMPLOYEE
    Posted Feb 20, 2012 12:29 PM

    Please open a TAC case so that they can replicate your issue.  There was a problem with this MIB in the distant past.   TAC should be able to tell you why you are getting it without the ip address.

     



  • 3.  RE: SNMP: wlsxAccessPointIsDown

    Posted Feb 20, 2012 12:38 PM

    Thanks, Collin.  Will do.