Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

SNR

This thread has been viewed 1 times

  • 1.  SNR

    Posted Sep 17, 2012 12:15 PM

    Hi,

    majority of clients SNR shows 20 - 35 only, however the dashboard indicates no sign of a high interference, floor noise, interference and channel busy all shows in green, What could be wrong (why SNR not showing more that 45).

     

    Thanks

     



  • 2.  RE: SNR

    Posted Sep 17, 2012 01:21 PM
    It also depends on the transmit power of the APs.


  • 3.  RE: SNR

    Posted Sep 17, 2012 06:27 PM

    EIRP ?, if i increase, then intereference, noise floor increases.



  • 4.  RE: SNR

    Posted Sep 18, 2012 10:33 AM
    I was just mentioning that EIRP is also one of the factors on the signal strength that the clients are receiving.

    Do you have any specific concern based on the SNR received by the clients?


  • 5.  RE: SNR

    Posted Sep 18, 2012 11:58 AM

    Thanks for reply, my concern is that why snr isonly 20 -35 when AP is nearby and no interference, floor noise is shown.