i have an aruba 650 and configured for my LAN users to autenticate via domain ,
i did "aaa test-server mschapv2 nps" and authentication was successful.
my problem is that my SSID is not broadcasted though i have done all configurations
on the controller and WLAN lan is seen on the GUI
i post output of sh ap database
AP_In_Procurement Office Test 105 192.168.1.127 Up 1m:48s 2 192.168.0.237 0.0.0.0
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
M = Mesh node; Y = Mesh Recovery
Total APs:1
it shows 2 in the flags column , some1 help.